Advanced VPNs


Course No: EDU-JUN-VPN

Course Overview

This advanced course focuses on designing, deploying, and troubleshooting Layer 2 and Layer 3 provider-provisioned MPLS virtual private networks (VPNs).

Objectives

This is an intensive hands-on workshop, with students participating in a variety of configuration and troubleshooting scenarios. Each student team controls its own provider-edge (PE) and customer-edge (CE) router pairing, with the class sharing three provider routers that form the provider core.

Intended Audience

The primary audiences for this course include personnel who are responsible for the provisioning, deployment, and troubleshooting of provider-provisioned MPLS VPNs based on Juniper Networks M-series and T-series routers.

Course Level

This is an advanced-level course.

Prerequisites

Students should either have taken the Configuring Juniper Networks Routers class or have the equivalent experience from working with JUNOS Internet software in a production environment. A working knowledge of OSPF or IS-IS, BGP4, JUNOS policy, and MPLS is required for the hands-on portions of this workshop.

Course Contents

Day 1

Module 0: Introduction and Overview
Module 1: Introduction to VPNs

  • Overview of VPNs
  • CPE-Based VPNS
  • Provider-Provisioned VPNs
  • IETF Standards Update
  • Conclusions
  • Lab 1: General Setup

Module 2: Virtual and Logical Routers

  • Routing Instances
  • Virtual Routers
  • Logical Routers

Module 3: Layer 3 VPNs

  • RFC 4364 Terminology
  • VPN-IPv4 Address Structure
  • Optional Characteristics

Module 4: Basic Layer 3 VPN Configuration with JUNOS Software

  • Preliminary Steps
  • PE Configuration
  • Lab 2: RSVP Signaling, Static, and BGP Routing

Module 5: Troubleshooting Layer 3 VPNs

  • A Layered Approach
  • The vpn-interface Switch
  • PE– and CE–Based Traceroutes
  • Viewing VRF Tables and PE-PE Signaling Flow
  • Monitoring PE-CE Routing Protocols

Day 2

Module 6: Layer 3 VPN Scaling and Internet Access

  • Scaling RFC 4364
  • Public Internet Access Options
  • Lab 3: Route Reflection and Internet Access
  • Lab 4: LDP over RSVP Tunnels

Module 7: Layer 3 VPN Interprovider Backbones

  • Carrier of Carriers
  • Interprovider VPNs
  • Public Internet Access Options
  • Lab 5: Carrier of Carriers

Module 8: Layer 3 VPNs–Advanced Topics

  • Sharing Routes between VRFs on the Same PE Router
  • Hub-and-Spoke Technologies
  • Multicast
  • Layer 3 VPN CoS Options
  • GRE Tunneling
  • IPSec/RFC 4364 Integration
  • Lab 6: Hub and Spoke (Optional)

Module 9: Layer 2 VPNs (Kompella)

  • Overview of Layer 2 Provider-Provisioned VPNs
  • Draft-Kompella Operational Model: Control
  • Draft-Kompella Operational Model: Data Forwarding

Day 3

Module 10: Layer 2 VPN Configuration and Troubleshooting (Kompella)

  • Preliminary Layer 2 VPN Configuration
  • Layer 2 VPN Configuration
  • Troubleshooting Layer 2 VPNs
  • Lab 7: Layer 2 VPNS–Kompella

Module 11: Layer 2 VPN Scaling and CoS

  • Review of VPN Scaling Mechanisms
  • Layer 2 VPNs and CoS

Module 12: Layer 2 VPNs (Martini)

  • Draft-Martini Configuration
  • l2circuit Configuration
  • l2circuit Monitoring and Troubleshooting
  • Labs 8 and 9: Layer 2 VPNS–Martini and CCC (Optional)

Appendix A: MPLS Review and Background Information
Appendix B: Virtual Private LAN Service
Appendix C: Additional Feature

 

 

 

Alanında uzmanlaşmış yüksek nitelikli bir teknik ekibe sahip olan BNTPRO, Enterprise Routing uzmanlığının ön koşullarını tamamlayarak Juniper Networks’ün Elite Partner’ı oldu.

BNTPRO Juniper Networks’le yapmış olduğu anlaşma neticesinde Juniper’ın Türkiye’deki tek yetkili eğitim merkezi olmaya hak kazanmıştır.

Juniper Networks’ün yetkili eğitim merkezi olarak eğitim portföyünü genişletmeye devam ediyor.

 

 

Copyright ©2008     BNTPRO Bilgi ve İletişim Hizmetleri Ltd. Şti. | Site Haritasi