Integrating Juniper Networks Firewalls/IPSec VPNs into High-Performance Networks
Course No: EDU-JUN-IFVH
Course Overview
This three-day course focuses on the ScreenOS features that are typically required in large-scale networks, including dynamic routing, virtual systems, traffic shaping, and high availability. Upon completing this course, students should be able to return to work and successfully install, configure, and verify that a ScreenOS-based device is interoperating in the network as desired. Through demonstrations and hands-on labs, students gain experience in configuring, testing, and troubleshooting these advanced features of ScreenOS software.
Objectives
After successfully completing this course, you should be able to:
- Configure virtual systems, including standard, IP-based, and transparent mode.
- Configure dynamic routing protocols, including OSPF and BGP.
- Configure multicast operations, including IGMP and PIM-SM.
- Configure high availability in both static routing and dynamic routing environments.
- Configure traffic shaping features.
- Verify operations and troubleshoot all previous configurations.
Intended Audience
This course is intended for network engineers, network support personnel, and reseller support personnel.
Course Level
This is an intermediate-level course.
Prerequisites
This course prerequisites for this course include the following:
Course Contents
Day 1
Chapter 1: Course Introduction
Chapter 2: ScreenOS VPN Basics Review
- Concepts Review
- Configuration Review
- Lab 1: ScreenOS Basics Review
Chapter 3: OSPF
- OSPF Operations
- OSPF Configuration
- Verification and Troubleshooting
- Lab 2: Part 1–Configuring OSPF
- Route Redistribution
- Lab 2: Part 2–Configuring Redistribution
- Route Optimization
- Lab 2: Part 3–Optimizing Routing Tables
Chapter 4: BGP
- BGP Operations
- EBGP Configuration
- Filtering on Per-Peer Basis
- Verification and Troubleshooting
- IBGP Configuration
- BGP Connectivity
- Lab 3: Configuring BGP
Day 2
Chapter 5: Advanced Static Routing
- Source-Based Routing
- Policy-Based Routing
- Destination Routing
- Lab 4: Configuring Advanced Static Routes
Chapter 6: Multicast
- IGMP Operations
- IGMP Configuration
- PIM-SM Operations
- PIM-SM Configuration
- Multicast Policies
- Lab 5: Configuring Multicast Support
Chapter 7: Virtual Systems
- VSYS Operations and Concepts
- Configuring VSYS Using Interface Classification
- Lab 6: Part 1–Creating a VSYS
- VSYS Resource Management
- Inter-VSYS Routing
- Lab 6: Part 2–Inter-VSYS Routing
- Lab 6: Part 3–Route Export
- Address Translation
- Lab 6: Part 4–Address Translation
Day 3
Chapter 8: Redundancy
- NSRP Terms and Concepts
- Configuring NSRP Active/Passive
- Configuring NSRP Active/Active, VSD-Less Cluster, and NSRP-Lite
- Tuning Failover Performance
- Redundant Interfaces
- Demo: NSRP
Chapter 9: Traffic Management
- Need for Traffic Management
- Egress Traffic Shaping
- Ingress Policing
- DSCP Marking
Appendix A: Virtual Systems Variations
- VSYS with IP Classification
- Transparent Mode VSYS
|
